2.5 W / mK Phase Changing Materials For IGBTs Cache Chips High Thermal Conductive

  The TIC™800A Series is low melting point thermal interface material. At 50, The TIC™800A Series begins to soften and flow, filling the microscopic irregularities of both the thermal solution and the integrated circuit package surface, thereby reducing thermal resistance.The TIC™800A Series is a flexible solid at room temperature and freestanding without reinforcing components that reduce thermal performance. 

      The TIC™800A Series shows no thermal performance degradation after 1,000 hours@130,or after 500 cycles, from -25 to 125.The material softens and does not fully change state resulting in minimal migration (pump out)at operating temperatures. 

Features:

> 0.018-in² /W thermal resistance
> Naturally tacky at room temperature, no adhesive required             
> No heat sink preheating required 

Applications:

> High Frequency Microprocessors

> Notebook and Desktop PCs
> Computer Serves
> Memory Modules
> Cache Chips
> IGBTs

Typical Properties of TIC™800A Series
Product Name	TICTM803A	TICTM805A	TICTM808A	TICTM810A	Testing standards
Color	Ashy	Ashy	Ashy	Ashy	Visual
Composite Thickness	0.003" (0.076mm)	0.005" (0.126mm)	0.008" (0.203mm)	0.010" (0.254mm)
Thickness Tolerance	±0.0006" (±0.016mm)	±0.0008" (±0.019mm)	±0.0008" (±0.019mm)	±0.0012" (±0.030mm)
Density	2.5g/cc				Helium   Pycnometer
Work Temperature	-25125
phase transition  temperature	50~60
Setting temperature	70 for 5 minutes
Thermal conductivity	2.5 W/mK				ASTM D5470 (modified)
Thermal lmpedance @ 50 psi(345 KPa)@ 50 psi(345 KPa)	0.018-in²/W	0.020-in²/W	0.047-in²/W	0.072-in²/W	ASTM D5470 (modified)
	0.11-cm²/W	0.13-cm²/W	0.30-cm²/W	0.46-cm²/W

 

Standard Thicknesses:

0.003"(0.076mm)          0.005"(0.127mm)          0.008"(0.203mm)          0.010"(0.254mm)                  
Consult the factory alternate thickness.

Standard Sizes:

9" x 18"(228mm x 457mm)      9" x 400'(228mm x 121M)            
TIC™800 series are supplied with a white release paper and a bottom liner. TIC™800 series is available in kiss cut an extended pull tab liner or individual die cut shapes.

Peressure Sensitive Adhesive: 

Peressure Sensitive Adhesive is not applicable for TIC™800 series products.

Reinforcement: 

No reinforcement is necessary.